TOPAS 4K

4K optical transmission for Panasonic AW-UE150

Overview

The users of the Panasonic AW-UE150 PTZ camera are going to enjoy the featured Ereca TOPAS 4K allowing to transmit all signals over fibre and remote power the UE150 camera.

 

Topas 4K is specially designed and shaped to complete perfectly the UE150.
The mechanical interface of the transmitter enclosure has been precisely cut so it matches the camera bottom and mounting bracket for quick and easy installation while staying visually discrete.

The transmission module works with standard SMPTE cables (Lemo and Neutrik) and allows to power remotely the UE150 camera and the Topas 4K transmitter over 800 meters. The transmitter is also available with local power option and SC/APC connectors.

The receiver side comes with two options:

  • A standalone half rack 1RU receiver with remote power capacity and basic diagnosis.
  • For Cam Racer’s owners, the Topas 4K transmitter has been made compatible with the Cam Racer basestation receiver (signals and power), offering a complete solution comfortable to use with embedded web management and detailed diagnosis.
Topas 4K - RX (front & back)
Highlights

Each TOPAS 4K system transmits the following signal set:

  • 1 x 12G SDI signal from Camera,
  • 1 x 3G SDI signal from Camera,
  • 1 x HD SDI monitoring signal from Camera,
  • 1 x HD SDI from basestation (return path),
  • 1 x Genlock from basestation (Composite video / Black burst / Tri-level),
  • 2 x Audio from basestation (can be optionally shared with LANC remote signal),
  • 1 x Ethernet 10/100 Mbps,
  • 1 x Serial data RS 232/422/485,
  • 1 x Tally Contact closure from basestation.

A small internal silent fan provides cooling of the transmitter electronics and
power supply section.

Optical

Dynamic range: 15 dB for control and 3G SDI, 10dB for 12G SDI
Connector: Remote powering: LEMO 3K (EDW / FXW) or NEUTRIK OpticalCon DUO. Local powering: SC/APC

 

SDI Video

Connector: 3G certified 75Ω BNC and 12G certified 75Ω BNC
Standard: HD, 3G, 6G, 12G
Amplitude: Input: cable equalization on all channels including 12G, Output: 800 mV pp / reclocked
Return loss: Better than: – 15 dB for 0 to 1.5 Ghz, – 10 dB for 1,5G to 3G, -6dB for 3G to 12G

 

Composite Video / GL

Number, connector: 1 from basestation to camera, 75Ω BNC.
Standard: Composite video, Black Burst, Tri-level (Bi / Tri level auto sense)
Performance: BW > 5.8 MHz at +/- 0.2 dB, DgDp < 1%, < 1°, Group delay < 10 ns, SNR > 67 dB (CCIR567).

 

Analog Audio

Number, connector: 2 channels from basestation, 2.5mm Jack
Impedance: Input: 10 KΩ differential (non-floating), Output: 20 Ω differential (non-floating)
Amplitude: +18 dBm maximium.
Bandwidth: 50 Hz to 15 KHz at +/- 0.5dB, (20 Hz to 20 KHz at -3 dB).
Distortion: 0.05% at 1Khz / 0 dBm.
Signal to noise ratio: 90dB, “A” weighted

 

Lanc

Number, connector: 1 bidirectionnal, 2.5mm Jack / In place of audio output upon request.
Protocol: Standard LANC or RC-V100 remote protocol (5V open collector signaling).

 

Data

Number, connector: 2 bidirectional channel, RJ45 for Channel 1, Hirose 12 for channel 2
Protocols: RS485, RS422, RS232
Data rate: 0 to 500 Kbd/s

 

Ethernet

Number, connector: 1 channel, RJ 45
Protocols: 10 or 100 Mb/s, Full or Half-duplex (Auto sense), MDI or MDI-X (Auto sense)

 

Tally

Number 1 Tally
Tally Output: Relay (dry contact) shared with serial RJ45 (direct connection to UE150)
Tally Input: Contact input

 

Power section

Camera unit: 8 Watts + Silent fan cooling
Camera power capacity: 12V, 50W continuous

 

Mechanical

Transmitter: 33mm thickness / Size of the camera, weight 1,45kg
Transmitter Color: Available in Black or White enclosure
Receiver: 1/2 RU 19” rack, depth 300mm excluding connectors, weight 1,55kg
19″ Rack integration Coupling kit available for 2 receivers for integration in 1RU 19″, weight 0.05kg
Operating Temp range: From -20 to + 60°C. (Avoiding direct sun exposition)

Related Products