NET E/R GIGA

Giga Ethernet transmitter over optical fiber

Introduction

The NET E/R GIGA range is designed for Ethernet transmission over optical fiber. Along with the NET E/R HD SDI video modules these products are dedicated for infrastructure applications like rented transmissions or intra studio intercommunication.

The transmission board fits in NET RACER chassis, the NET RACER 3U with 16 modules capacity and the NET RACER COMPACT standalone with 2 modules capacity. The NET RACER built in management unit provides a comprehensive transmission board status through Web Browser or SNMP for local or remote management.

This module is built around best in class Ethernet switch with low latency TCAM lookup engine, for on the fly packet forwarding rather than store and forward.
As an option this module can be equipped to support, Sync-E, synchronous Ethernet clock management.

The module is equipped with 3 gigabit electrical ports and 1 optical trunk port. The optical port can be equipped with an industry standard SFP module or with a built in optical component with better performance or for best application suit. When an SFP in inserted it takes precedence over the internal optical component.

Up to three Pre defined V-LAN can be set up through the management system to share the bandwidth for different customers or different networks. It also allow a free low data rate channel for the management of remote NET RACER chassis located at customer plants away from service provider.

Depending on distance and number of fiber available for the application, standard wavelength or multichannel CWDM multiplexing can be used. Multiplexers with 4, 8 or 16 wavelength directly fits in the NER RACER platform.

Electrical Switch Engine

Number of signals: 3 Gigabit Ethernet ports
Standards: 10, 100, 1000 Mbs
Crossover: Auto MDI
Cable equalization: 100 m of CAT 5 cable
Connector: RJ45
Signaling LED: Link/Act for 10/100 Mbs, Link/Act for 1Gbs.

Up to 10K bytes (Jumbo Frames)

Memory: 1 Megabit
Packet size:
MAC address table: 8000 entries
Routing: Tcam based fast forward
Real time protocol: Transparent to IEEE1588 and AVB frames
Synchronous Ethernet: Built in SYNC-E Phase locked loop with high stability reference (optional).

 

Optical

Component: Laser 1310nm, 1550nm, CWDM, Bidirectional module. / 1.25Gbs SFP module
Output power: 0 dBm (internal optics)
Receiver sensitivity: Better than – 25 dBm (internal optics)
Connector: SC/APC 8°
Signaling LED: Low optical level on receiver.

Link/Act on 1000base FX

 

Powering

Power consumption: 2 to 3 watts depending model type
Signaling LED: Module internal power supplies in their tolerance.

 

Management

NET RACER Management: Built in unit in 19″ 3U NET RACER platform

  • Board optical configuration (Laser power / Wavelength)
  • Signal state/ Alarms report
  • Optical power measurement
  • Pre defined VLAN  settings

 

Mechanical

Module size: Single slot module for 19″ 3U, 16 slots NET RACER Platform

or

Standalone box with 2 slots: NET RACER COMPACT.